lm108 ? 2013 rochester electronics, llc. all rights reserved 06062013 specifcation number lm108-cm(r) rev a page 1 of 4 rochester electronics guarantees performance of its semiconductor products to the original oem specifcations. typical values are for reference purposes only. certain minimum or maximum ratings may be based on product characterization, design, simulation, or sample testing. rochester electronics reserves the right to make changes without further notice to any specifcation herein. for complete rochester ordering guide, please refer to page 2. please contact factory for specifc package and specifcation availability . original creation date: 06/29/95 last update date: 12/10/96 last major revision date: 06/29/95 mnlm108-x rev 0bl military data sheet operational amplifiers ns part numbers lm108h/883 lm108j-8/883 lm108j/883 industry part number lm108 prime die lm108 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1 lm108 operational amplifier rochester part number ocm part number package temperature lm108h lm108h can-8, metal -55 to +125c lm108h/b lm108h/883 can-8, metal -55 to +125c lm108jg-8/b lm108jg-8/883 cdip-8 -55 to +125c lm108j lm108j cdip-14 -55 to +125c rochester ordering guide *most products can also be offered as rohs compliant, designated by a Cg suffx. please contact factory for more information.
page 2 of 4 mnlm108-x rev 0bl military data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc = +20v, vcm = 0v symbol parameter conditions notes pin- name min max unit sub- groups vio input offset voltage vcm = -15v -2.0 2.0 mv 1 -3.0 3.0 mv 2, 3 vcm = 15v -2.0 2.0 mv 1 -3.0 3.0 mv 2, 3 -2.0 2.0 mv 1 -3.0 3.0 mv 2, 3 vcc = +5v -2.0 2.0 mv 1 vcc = +5v -3.0 3.0 mv 2, 3 iio input offset current vcm = -15v -0.2 0.2 na 1 -0.4 0.4 na 2, 3 -0.2 0.2 na 1 -0.4 0.4 na 2, 3 -0.2 0.2 na 1 -0.4 0.4 na 2, 3 vcc = +5v -0.2 0.2 na 1 vcc = +5v -0.4 0.4 na 2, 3 iib+ input bias current vcm = -15v -0.1 2 na 1 -1.0 3.0 na 2, 3 vcm = 15v -0.1 2 na 1 -1.0 3.0 na 2, 3 -0.1 2 na 1 -1.0 3.0 na 2, 3 vcc = +5v -0.1 2 na 1 vcc = +5v -0.1 3.0 na 2, 3 2 lm108 specifcation number lm108-cm(r) rev a
page 3 of 4 mnlm108-x rev 0bl military data sheet electrical characteristics dc parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc = +20v, vcm = 0v symbol parameter conditions notes pin- name min max unit sub- groups iib- input bias current vcm = -15v -0.1 2 na 1 -1.0 3.0 na 2, 3 vcm = 15v -0.1 2 na 1 -1.0 3.0 na 2, 3 -0.1 2 na 1 -1.0 3.0 na 2, 3 vcc = +5v -1.0 2 na 1 vcc = +5v -1.0 3.0 na 2, 3 psrr power supply rejection ratio +20v <= vcc <= +5v 80 db 1, 2, 3 cmrr common mode rejection ratio -15v <= vcm <= 15v 85 db 1, 2, 3 ios+ short circuit current vcc = +15v -30 -1.0 ma 1, 2, 3 ios- short circuit current vcc = +5v 1 30 ma 1, 2, 3 icc power supply current 0.6 ma 1 0.4 ma 2 0.8 ma 3 rin input resistance 2 30 mohm 1 3 lm108 specifcation number lm108-cm(r) rev a
page 4 of 4 mnlm108-x rev 0bl military data sheet electrical characteristics dc/ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc = +20v, vcm = 0v ac: vcc = +20v, vcm = 0v symbol parameter conditions notes pin- name min max unit sub- groups vin input voltage range vcc = +15v 1 +14 v 1, 2 vcc = +15v 1 +13.5 v3 1 +15 v 1, 2, 3 delta vio/delta t temperature coeffient of input offset voltage 25c <= ta <= +125c 4 15 uv/c 2 -55c <= ta <= 25c 4 15 uv/c 3 delta iio/delta t temperature coeffient of input offset current 25c <= ta <= +125c 4 2.5 pa/c 2 -55c <= ta <= 25c 4 2.5 pa/c 3 vop+ output voltage swing vcc = +15v, rl = 10k ohms 13 v 4, 5, 6 vop- output voltage swing vcc = +15v, rl = 10k ohms -13 v 4, 5, 6 avs+ open loop voltage gain vcc = +15v, rl = 10k ohms, vout = 0 to 10v 3 50 v/mv 4 vcc = +15v, rl = 10k ohms, vout = 0 to 10v 3 25 v/mv 5, 6 avs- open loop voltage gain vcc = +15v, rl = 10k ohms, vout = 0 to -10v 3 50 v/mv 4 vcc = +15v, rl = 10k ohms, vout = 0 to -10v 3 25 v/mv 5, 6 tr(tr) rise time 2 1 us 7 tr(os) overshoot 2 30 % 7 dc parameters: drift values (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc = +20v, vcm = 0v. "deltas not required on b-level product. deltas required for s-level product only as specified on internal processing instructions (ipi)." vio input offset voltage vcm = 15v -0.5 0.5 mv 1 iib+ input bias current vcm = 15v -1 1 na 1 iib- input bias current vcm = 15v -1 1 na 1 note 1: parameter tested go-no-go only. note 2: guaranteed parameter not tested. note 3: datalog in k = v/mv. note 4: calculated parameter for class "s" only. 4 rochester electronics guarantees performance of its semiconductor products to the original oem specifcations. typical values are for reference purposes only. certain minimum or maximum ratings may be based on product characterization, design, simulation, or sample testing. rochester electronics reserves the right to make changes without further notice to any specifcation herein. lm108 specifcation number lm108-cm(r) rev a
|
